ALIENCULTIST.COM
HARDWARE ARCHIVES // PART RECORD

[ DDR DIMM GENERATIONS // IDENTIFIED COMPONENT ]

DDR2-800 UDIMM (PC2-6400)

DDR2 desktop memory standard. This file identifies a specific part or clearly bounded model family, rather than an overview of the category.

Original locally stored schematic illustration for DDR2-800 UDIMM (PC2-6400); not a product photograph
LOCAL REFERENCE SCHEMATIC // NOT TO SCALE

IDENTIFY THE REVISION: Check the complete product code, suffix, board revision, region, firmware, and date code. Similar names do not guarantee the same hardware.

Part specifications

Catalog subcategoryDDR DIMM generations
Catalog identityDDR2-800 UDIMM (PC2-6400)
Generation / familyDDR2 desktop memory standard
Architecture / ratings240-pin DIMM; 1.8 V nominal JEDEC; 800 MT/s data rate; 6.4 GB/s theoretical bandwidth per 64-bit channel.
Interface / fitDDR2 is mechanically keyed differently from DDR/DDR3; board max capacity and density support vary.
Variants / field identificationPC2-6400 is bandwidth class; rated modules may use overclocked voltage/timings beyond JEDEC.
Evidence to collectPhotograph the nameplate and PCB labels; record test system, firmware, installed accessories, condition, and manual/datasheet revision used to verify specifications.

Compatibility, care & service

  • Check electrical signaling, pinout, voltage, current, connector, mounting and supported firmware before installation; do not rely on matching shapes alone.
  • Inspect physical condition and manufacturer warnings; mains PSUs, CRTs, batteries and spinning media may retain hazardous energy or require specialist service.
  • For vintage equipment, use the correct bus generation, BIOS, driver, media type, cable orientation and resource configuration documented for the machine.
  • Record measured results separately from the manufacturer's published limits and state the setup and measurement conditions.

Model-specific notes

DDR2 is mechanically keyed differently from DDR/DDR3; board max capacity and density support vary.

PC2-6400 is bandwidth class; rated modules may use overclocked voltage/timings beyond JEDEC.

Sources & further reading

  1. Manufacturer / standards reference — DDR2-800 UDIMM (PC2-6400)Source for product-family specifications; compare exact suffix, revision, and region with the unit label.
  2. Manufacturer / standards reference — DDR2-800 UDIMM (PC2-6400)Source for product-family specifications; compare exact suffix, revision, and region with the unit label.

Links lead to manufacturer or standards references where available. If a source covers a family, use the exact model's manual as the final authority.