ALIENCULTIST.COM
HARDWARE ARCHIVES // PART RECORD

[ MICE AND TRACKBALLS // IDENTIFIED COMPONENT ]

Logitech TrackMan Marble

Wired optical trackball with a symmetrical body, large red tracking ball, and four buttons.

Original local schematic of Logitech TrackMan Marble; not a product photograph
LOCAL REFERENCE SCHEMATIC // NOT TO SCALE

MODEL IDENTIFICATION: Manufacturer identity: T-BC21. Compare the unit label, regional suffix, and revision against the manufacturer's manual before repair or compatibility claims.

Model specifications

Catalog subcategoryMice and trackballs
Exact model / IDT-BC21
Model-specific featuresUSB wired interface; optical ball tracking; four buttons; no dedicated scroll wheel. Exact bundled accessories and labeling can differ between regional packages.
Interface and host supportUSB HID pointing device. Scrolling and button reassignment may require Logitech software or host accessibility settings; legacy software availability and OS support are limited.
Revision / driver caveatCheck for T-BC21 on the underside; do not conflate this with later Marble Mouse variants. Old software may not install on current operating systems, although basic HID tracking can work.

Preservation and service notes

Remove the ball to clear dust from the three support points; avoid liquids on the optical sensor. Inspect the captive cable near its strain relief and confirm the ball is not substituted.

Record the as-found label, accessories, host OS, driver/firmware version, and test method. Separate observed condition from published specifications; do not treat family-level feature claims as proof of a unit's revision.

Primary manufacturer documentation

  1. Logitech support — TrackMan MarbleManufacturer setup guide for the TrackMan Marble family; use the bottom label to identify the exact revision.
  2. Logitech support — TrackMan Marble downloadsManufacturer support/download search; archived software is host-version dependent.

Manufacturer pages may change or retire. Preserve a copy of the applicable manual and note its revision when documenting a physical unit.