[ IDENTIFIED SURVEILLANCE HDD // MODEL-SPECIFIC RECORD ]
Toshiba S300 Pro MD10ADA800V
8 TB; 3.5-inch; SATA 6.0 Gbit/s. S300 Pro surveillance drive identified by its complete MD10ADA800V model number. Specifications below are tied to the manufacturer’s capacity/model table; do not treat other capacities or suffixes as interchangeable.
IDENTIFICATION: The manufacturer datasheet lists this exact bulk model number and capacity. The datasheet specifies continuous surveillance operation and CMR recording. Verify the exact nameplate and revision before procurement, service or recovery.
Recorded specifications
| Exact manufacturer number | MD10ADA800V |
|---|---|
| Capacity | 8 TB (decimal, manufacturer-rated) |
| Form factor | 3.5-inch; check chassis clearance, mounting, carrier and cooling. |
| Interface | SATA 6.0 Gbit/s (manufacturer-rated); backward link negotiation depends on the host controller. |
| Rotational speed | 7,200 rpm |
| Buffer / cache | 512 MB (manufacturer-listed buffer) |
| Recording technology | CMR (conventional magnetic recording) |
| Annual workload rating | 300 TB/year; this is a rated annualized workload, not a guarantee of performance or suitability for every RAID rebuild or write pattern. |
| Surveillance workload | 24/7 professional surveillance including sDVR/sNVR and surveillance RAID arrays; Toshiba specifies up to 64 cameras, up to 24 drive bays and a 300 TB/year workload rating. CMR is the documented choice here for sustained mixed-write/rebuild workloads, subject to NVR/HBA validation. |
| Host compatibility | The S300 Pro data sheet identifies 3.5-inch SATA 6.0 Gbit/s, Advanced Format and surveillance RAID use. Confirm controller/firmware support for 8 TB and GPT provisioning, supported sector presentation, power and cooling. A SATA connector alone does not establish compatibility with a given DVR, NVR, HBA, expander, RAID controller or enclosure. |
Host integration and recording notes
- Use a SATA-capable DVR/NVR, HBA or backplane that supports this capacity and the manufacturer’s documented workload; confirm drive-bay count, airflow, vibration and power requirements in the exact system’s qualification list.
- All cited Toshiba specifications identify a 3.5-inch SATA device. SAS-only hosts are not automatically compatible; verify SATA-device support for the actual controller, expander and enclosure.
- Use a GPT-aware operating system and confirm the NVR/RAID stack supports this capacity, address range and sector presentation before initializing. Preserve any system-specific provisioning or firmware procedures.
- Recording method matters: SMR can behave differently under sustained random writes, rebuilds and repeated overwrites than CMR. Use the manufacturer’s stated surveillance application and do not substitute desktop benchmarks for a workload qualification.
- If the drive contains wanted data and reports errors, avoid writes, formatting, repeated power cycles and stress tests. Capture model, firmware, host and symptom details and consult a qualified recovery specialist.
Manufacturer documentation
- Toshiba S300 Pro manufacturer datasheetPrimary Toshiba technical datasheet: exact SKU/capacity table and model-family performance, recording technology, workload and interface specifications.
- Toshiba S300 Pro manufacturer product and compatibility pageSecond Toshiba manufacturer reference for product-line surveillance applications and host-use context. Check the exact model and revision against the datasheet before deployment.
Manufacturer documentation can change. The values above reflect the cited revision; verify the drive label and host qualification at installation.