ALIENCULTIST.COM
HARDWARE ARCHIVES // COMPONENT RECORD

[ BOARD-PARTNER GRAPHICS // IDENTIFIED COMPONENT ]

PowerColor Red Devil Radeon RX 7900 XTX 24 GB

Navi 31 XTX / RDNA 3 (2022). This record describes the named add-in-board variant and its published configuration, not every RX 7900 XTX/XT board. Verify its exact product label, revision and manufacturer document before installation or service.

Original local schematic for PowerColor Red Devil Radeon RX 7900 XTX 24 GB; not a photograph or dimensional drawing
ORIGINAL LOCAL REFERENCE ART // NOT TO SCALE

MODEL / SKU: RX7900XTX 24G-E/OC — Red Devil OC 24 GB GDDR6. Board-partner clocks, PCB, cooling, output bracket and BIOS are distinct from AMD's reference design.

Recorded board specifications

Cataloged board / exact SKUPOWERCOLOR Red Devil OC 24 GB GDDR6; RX7900XTX 24G-E/OC.
GPU / architecture / launchNavi 31 XTX / RDNA 3 (2022); Navi 31-family GPU.
GPU resources6,144 stream processors; product clocks are factory/BIOS-profile dependent and are intentionally not generalized across revisions.
Memory / bus24 GB GDDR6 at 20 Gb/s on a 384-bit interface (960 GB/s raw bandwidth); 96 MB Infinity Cache.
Host interfacePCI Express 4.0 x16 physical/electrical board interface. Link speed and lane operation depend on host, firmware, slot wiring and negotiated link.
Board power / auxiliary inputAMD reference RX 7900 XTX board power is 355 W. PowerColor specifies three 8-pin PCIe connectors for this Red Devil board; the product page does not publish a separate TBP, so do not treat the reference figure as an exact OC-board draw.
Dimensions / cooler envelope338 × 135 × 73 mm (length × height × thickness), approximately 3.5-slot cooler. Allow additional chassis and cable clearance; dimensions are the partner listing, not a guarantee for every production revision.
Display outputs3 × DisplayPort 2.1 and 1 × HDMI 2.1. Output versions, simultaneous-display limits and supported modes depend on firmware, driver, cables and display.
Revision / fit caveatCataloged SKU RX7900XTX 24G-E/OC. Red Devil PCB and cooler revisions, BIOS switch position, regional power guidance, and physical port layout should be checked against the card label/manual.

Compatibility, service & revision notes

Check the model/SKU suffix and PCB or cooler revision against the card label before purchasing power leads, a replacement cooler or a firmware image. Fit is governed by measured card length, height, thickness, adjacent-slot obstruction, case structure and power-lead bend space—not by the slot count alone. Partner power limits and factory overclock profiles may differ from AMD reference specifications.

  • Use the power connectors and PSU capacity in the exact partner manual; fully seat the plugs and do not adapt or force damaged connectors.
  • Record serial/part labels, subsystem ID, BIOS switch position, driver version and physical condition. Do not flash a ROM unless it explicitly matches the board revision and subsystem.
  • Confirm the supported OS/driver branch and display-output capability for the intended platform; link generation negotiates with the host but does not resolve firmware or power incompatibility.

Manufacturer & product sources

  1. PowerColor Red Devil Radeon RX 7900 XTX product pageBoard-partner product/specification page for the identified family; verify the exact SKU suffix and any revision-specific downloads before service.
  2. AMD Radeon RX 7900 XTX product specificationsAMD GPU-family/reference information for processor resources and baseline platform requirements; not a substitute for the named add-in-board specification.
  3. Unknown — PowerColor RX 7900 XTX Red Devil Review and BenchmarksIndependent video review; treat as supplementary context, not primary manufacturer documentation.

Static archive record. Physical card label, current partner manual and revision-matched product page take precedence when they conflict with this summary.