ALIENCULTIST.COM
HARDWARE ARCHIVES // COMPONENT RECORD

[ CAPTURE AND SERIAL I/O // IDENTIFIED COMPONENT ]

StarTech PEX2S5531P 2-Port Serial Card

PCIe x1 RS-232 serial adapter. This entry records a distinct product or well-defined family; differences among revisions and similarly named models are called out below.

Locally stored schematic representing StarTech PEX2S5531P 2-Port Serial Card; not a photograph or dimensional drawing
LOCAL REFERENCE ART // NOT TO SCALE OR A PRODUCT PHOTOGRAPH

MODEL IDENTIFICATION: Match the full model/part number, revision, and region to the item label and its manufacturer documentation. Where a family has multiple revisions, specifications below are not universal across the family.

Recorded specifications

Cataloged partStarTech PEX2S5531P 2-Port Serial Card
Era / familyPCIe x1 RS-232 serial adapter
Key specificationsTwo DB9 RS-232 ports; PCIe x1; chipset and FIFO/baud support specified by exact SKU.
Interface / fitOperating system driver and low-profile/full-height bracket included with exact package; serial voltage is not RS-422/485.
Variants / identificationCheck full PEX SKU suffix; StarTech adapters with same port count may implement different electrical standards.
Archive recordRecord full part number, hardware revision, serial/date code, firmware/BIOS, accessories, physical condition, and the documentation revision used for verification.

Compatibility and handling

  • Confirm the complete part number, connector signal/pinout, supported host, dimensions, power, firmware and operating-system requirements before use.
  • Inspect for corrosion, cracked parts, bent pins, damaged insulation, failing bearings, leaking cells, or prior repair. Avoid powering unidentified or damaged hardware.
  • For compatibility claims, cite a specific manual, CPU support list, interface standard, or tested host configuration; physical fit alone is insufficient.
  • Record measurements with the test setup and instrument conditions; distinguish vendor maximums from measured or sustained results.

Model notes

Operating system driver and low-profile/full-height bracket included with exact package; serial voltage is not RS-422/485.

Check full PEX SKU suffix; StarTech adapters with same port count may implement different electrical standards.

Sources & further reading

  1. Manufacturer / standards documentation — StarTech PEX2S5531P 2-Port Serial CardReference supplied for this specific model or standards family; verify full revision against the nameplate/manual.
  2. Manufacturer / standards documentation — StarTech PEX2S5531P 2-Port Serial CardReference supplied for this specific model or standards family; verify full revision against the nameplate/manual. Original page is gone; this is the Internet Archive’s copy.

Source links may describe a product family, not the exact board revision or region. The full model-specific manual/specification takes precedence.