ALIENCULTIST.COM
HARDWARE ARCHIVES // COMPONENT RECORD

[ INDIVIDUAL COMPONENT // EXPANSION CARDS ]

LSI SAS 9211-8i

PCIe 2.0 x8 SAS/SATA host bus adapter; eight internal 6 Gb/s SAS/SATA lanes. This is a model-specific catalog entry; confirm the exact label and revision before use.

Original local schematic labeled LSI SAS 9211-8i; not a product photograph or dimensional drawing
ORIGINAL LOCAL SCHEMATIC // NOT TO SCALE OR A PRODUCT PHOTOGRAPH

IDENTIFICATION: Match the full model/part number and board revision to the label. Port and bus information below is included only where the linked manufacturer or standards documentation supports it; revisions and platform support may differ.

Specifications and service checks

Catalog subcategoryStorage and disk controllers
Exact model / part identifierLSI00200 (board assembly; verify label/revision)
Bus / host interfacePCI Express 2.0 x8
Verified interfaces / protocolsSAS 2.0 / SATA 6 Gb/s; eight internal lanes across two SFF-8087 connectors.
OS / driver / firmware caveatFirmware personality (IT/HBA or IR/RAID) and driver/OS support must match the use case; consult the LSI 9201/9211 HBA guide for supported systems and firmware procedures. Do not cross-flash by board appearance alone.
Service noteRecord the SAS address, board revision, and firmware mode before service. Use the specified SFF-8087 breakout/backplane wiring and ESD precautions; verify termination and expander/backplane compatibility.

Installation and archival notes

  • Record the board model, revision, serial/date code, firmware, bracket, accessories, and the documentation revision used to identify the unit.
  • Confirm the host slot's electrical wiring/keying, required power, supported OS/driver, and any platform or option-ROM restriction in the cited model documentation.
  • Use ESD precautions. Do not infer pinout, compatibility, protocol, boot support, or revision equivalence from a similar connector or product-family name.

Record the SAS address, board revision, and firmware mode before service. Use the specified SFF-8087 breakout/backplane wiring and ESD precautions; verify termination and expander/backplane compatibility.

Model-specific sources

  1. Broadcom — LSI SAS 9211-8i datasheetOfficial model-specific product and interface specifications.
  2. Broadcom — SAS 9211-8i support and downloadsModel-targeted manufacturer support search for firmware, drivers, and related documentation.

Source links are selected for this exact model or its manufacturer-documented family. Review the source revision and your card's printed identifiers before service.