ALIENCULTIST.COM
HARDWARE ARCHIVES // PART RECORD

[ PROFESSIONAL AUDIO // PCIe ADD-IN ]

ESI Juli@ XTe

A model-specific PCIe version of ESI’s stereo Juli@ interface, with reversible analog connector choice and digital audio support.

Original local schematic of ESI Juli@ XTe audio interface card
ORIGINAL LOCAL SCHEMATIC // AUDIO INTERFACE, NOT TO SCALE

MODEL SCOPE: ESI Juli@ XTe. PCIe stereo interface with swappable balanced TRS/unbalanced RCA I/O, S/PDIF, 24-bit/192 kHz conversion and MIDI. Confirm PCB/IS revision, accessories, slot wiring and current vendor driver before installation.

Model-specific specifications

Model-specific SKUESI Juli@ XTe
Host interface / lanesPCI Express x1 audio interface card.
Codec / conversion24-bit/192 kHz A/D (114 dB stated dynamic range) and D/A (112 dB); ESI does not identify converter IC part numbers on the cited page.
Analog I/OStereo analog input and output; the socket can be configured for balanced 1/4-inch TRS or unbalanced RCA operation.
Digital I/O / protocolsS/PDIF input/output for digital recording and AC-3/DTS passthrough, plus integrated MIDI interface; connector configuration is model-specific.
Resolution / sample rates24-bit at up to 192 kHz for analog conversion; digital channel mode and passthrough are source/device dependent.
Latency / monitoringESI describes low-latency EWDM drivers and ASIO support but publishes no fixed minimum buffer or round-trip time; host and driver settings determine measured latency.
Driver / OS compatibilityESI EWDM drivers with ASIO and other Windows audio standards; manufacturer lists Windows 32/64-bit and Mac OS X support. Juli@ XTe has been superseded by Juli@ eX; keep generations distinct.

Compatibility & preservation

Connector orientation determines balanced TRS versus unbalanced RCA wiring. Do not confuse the XTe PCIe board with the original PCI Juli@ or the replacement Juli@ eX.

  • Photograph the card label, PCB revision, rear connectors and included breakout cables before service.
  • Retain the exact working driver, firmware, operating-system version, clock and routing configuration.
  • Confirm lane wiring, bracket clearance, channel map and external converter/network compatibility; connector fit alone is not a compatibility guarantee.

Manufacturer sources

  1. ESI Juli@ XTe — manufacturer specificationsManufacturer documentation for this model, driver family or revision.
  2. ESI Juli@ XTe — official drivers and documentationManufacturer documentation for this model, driver family or revision.