ALIENCULTIST.COM
HARDWARE ARCHIVES // PART RECORD

[ AIR CPU COOLERS // IDENTIFIED COMPONENT ]

Intel Boxed Cooler E97379-003

Intel push-pin stock cooler assembly. This file identifies a specific part or clearly bounded model family, rather than an overview of the category.

Original locally stored schematic illustration for Intel Boxed Cooler E97379-003; not a product photograph
LOCAL REFERENCE SCHEMATIC // NOT TO SCALE

IDENTIFY THE REVISION: Check the complete product code, suffix, board revision, region, firmware, and date code. Similar names do not guarantee the same hardware.

Part specifications

Catalog subcategoryAir CPU coolers
Catalog identityIntel Boxed Cooler E97379-003
Generation / familyIntel push-pin stock cooler assembly
Architecture / ratingsRadial aluminum heatsink with 4-pin PWM fan; designed for specified LGA115x-era CPU thermal envelopes.
Interface / fitExact socket mounting and TDP class must match; used coolers may have brittle push pins or dry thermal compound.
Variants / field identificationIntel boxed cooler part numbers encode region, socket and thermal design; verify label and base.
Evidence to collectPhotograph the nameplate and PCB labels; record test system, firmware, installed accessories, condition, and manual/datasheet revision used to verify specifications.

Compatibility, care & service

  • Check electrical signaling, pinout, voltage, current, connector, mounting and supported firmware before installation; do not rely on matching shapes alone.
  • Inspect physical condition and manufacturer warnings; mains PSUs, CRTs, batteries and spinning media may retain hazardous energy or require specialist service.
  • For vintage equipment, use the correct bus generation, BIOS, driver, media type, cable orientation and resource configuration documented for the machine.
  • Record measured results separately from the manufacturer's published limits and state the setup and measurement conditions.

Model-specific notes

Exact socket mounting and TDP class must match; used coolers may have brittle push pins or dry thermal compound.

Intel boxed cooler part numbers encode region, socket and thermal design; verify label and base.

Sources & further reading

  1. Manufacturer / standards reference — Intel Boxed Cooler E97379-003Source for product-family specifications; compare exact suffix, revision, and region with the unit label.
  2. Manufacturer / standards reference — Intel Boxed Cooler E97379-003Source for product-family specifications; compare exact suffix, revision, and region with the unit label.

Links lead to manufacturer or standards references where available. If a source covers a family, use the exact model's manual as the final authority.