[ INDIVIDUAL COMPONENT // AIR CPU COOLING ]
Cooler Master Hyper 622 Halo Black
Dual-tower cooler with six heat pipes and two dual-loop Halo² 120 mm ARGB fans.
IDENTIFICATION: Match the model/SKU, revision, and supplied bracket. Dimensions and socket coverage can vary by package or region; verify the included hardware and current manufacturer documentation before installation.
Dimensions, fit, and manufacturer specifications
| Exact model / SKU | RR-D6BB-20PA-R1 |
|---|---|
| Overall dimensions | 125 × 137 × 157 mm (L × W × H). |
| Installed height / case clearance | 157 mm. |
| Supplied fan(s) | 2 × 120 × 120 × 25 mm Halo² PWM fans; 650–2,050 rpm ±10%. |
| Noise / airflow (manufacturer figures) | Manufacturer fan rating: up to 27 dB(A), with up to 51.88 CFM airflow per fan. |
| Heat pipes | Six heat pipes. |
| Socket bracket compatibility | Intel LGA 1851 / 1700 / 1200 / 115x; AMD AM5 / AM4. Use the included retention system for the exact package revision. |
| RAM / motherboard clearance | The product page describes broad case fitment but provides no single universal DIMM-height value; check fan/slot clearance on the chosen motherboard. Case must allow at least 157 mm cooler height. |
Cooler height is not a complete fit check: account for fan lift, side-panel clearance, motherboard heatsinks, DIMM position, and any case tolerance.
Installation and service notes
- Install only with the model-specific manual and retention hardware for the selected CPU socket. Confirm orientation and bracket standoff before tightening.
- Apply thermal interface material as directed by the cooler maker. Tighten evenly, connect PWM leads to suitable headers, and verify fan tachometer operation.
- Disconnect power and restrain fan blades during cleaning. Check for fin damage, cable contact, or loosened fasteners during service.
Manufacturer sources
- Cooler Master — Hyper 622 Halo Black product specificationsManufacturer dimensions, fan specifications, sockets, and cooler construction.
- Cooler Master — RR-D6BB-20PA-R1 product pageManufacturer product/SKU listing and model-specific support information.
Static reference only. Manufacturers can change regional SKUs, bracket bundles, product specifications, and support documents; check the documentation for the exact unit.