ALIENCULTIST.COM
HARDWARE ARCHIVES // COMPONENT RECORD

[ COOLING // IDENTIFIED COMPONENT ]

ARCTIC P12 Silent

120 × 120 × 25 mm fixed-speed low-noise case fan. This record identifies the exact variant and its documented electrical and mechanical limits.

Original locally stored schematic of ARCTIC P12 Silent; not a photograph or dimensional drawing
LOCAL REFERENCE ART // SCHEMATIC ONLY, NOT TO SCALE

MODEL IDENTIFICATION: ARCTIC P12 Silent. This entry applies to this exact product variant; suffixes such as Pro, PST, A-RGB, Slim, Silent, and CO describe distinct models or interfaces. Match the item number and revision to the manufacturer documentation.

Recorded specifications

Cataloged partARCTIC P12 Silent
Product classfixed-speed low-noise case fan
Frame dimensions120 × 120 × 25 mm
Speed / control range1050 rpm nominal fixed speed
Maximum airflow24.1 cfm (41 m³/h)
Maximum static pressure0.50 mm H₂O
Electrical rating12 V DC; 0.09 A
Connector3-pin fan connector; voltage control rather than PWM duty control
Interface / fit120 mm square mount with a 3-pin fan header or supported voltage-regulated controller. Verify the host can regulate a 3-pin DC fan if variable speed is required.
RecordkeepingRecord the exact model, item/revision, host, control mode, wiring, condition, and manufacturer document revision.

Host compatibility and handling

  • No CPU socket compatibility is claimed: this is a chassis/radiator fan, not a heatsink. Match the frame, mounting-hole pattern, depth, and airflow direction to the case or radiator manual.
  • 120 mm square mount with a 3-pin fan header or supported voltage-regulated controller. Verify the host can regulate a 3-pin DC fan if variable speed is required.
  • Before using a PST lead, calculate the combined current of every fan connected to that output; do not exceed the motherboard or controller channel rating.
  • Keep motor power/control distinct from any lighting connection. Match exact pinout and voltage to the host manual; never force a keyed plug or connect an addressable-lighting lead to an incompatible 12 V RGB header.
  • Unplug the host before installation. Keep fingers and loose wiring away from blades; replace cracked frames or damaged cables and investigate bearing noise rather than blocking a fan.

Model notes

P12 Silent is a fixed-speed 3-pin fan, unlike P12 PWM/PST relatives. A four-pin PWM header may provide basic three-pin power, but this fan does not accept PWM control.

Vendor airflow and pressure ratings are model/test-condition specifications, not a guarantee of the same result in a particular case or radiator. Confirm installed fan curves, actual clearances, and host current budget.

Sources & further reading

  1. ARCTIC manufacturer product page — ARCTIC P12 SilentProduct identification, model features, and connection details.
  2. ARCTIC manufacturer specification sheet — ARCTIC P12 SilentPrimary technical data reference for dimensions and performance figures recorded above.
  3. ARCTIC support / control documentationAdditional connection and host-control reference; verify the product revision and regional variant.

Manufacturer data may vary by revision and package. Check the complete model designation and item number on the actual unit.