ALIENCULTIST.COM
HARDWARE ARCHIVES // COMPONENT RECORD

[ TOWER AND LEGACY DESKTOP CASES // IDENTIFIED ENCLOSURE ]

SilverStone FARA R1 PRO

2021 ATX mid-tower. A model-specific enclosure record with physical fit limits, revision notes and manufacturer references.

Original local reference schematic for the SilverStone FARA R1 PRO, not a product photograph or dimensional drawing
ORIGINAL LOCAL SCHEMATIC // NOT TO SCALE

IDENTIFICATION: Confirm the chassis label, model suffix, revision and regional bundle. Manufacturer maximum clearances are conditional on fan, radiator, drive-cage and cable configurations; allow room for connectors and service access.

Recorded specifications

Cataloged modelSilverStone FARA R1 PRO
Era / class2021 ATX mid-tower
Dimensions and component limitsATX, microATX and Mini-ITX boards; 207 × 446 × 390 mm (W × H × D). Maximum GPU length 322 mm, cooler height 165 mm, and PSU length 160 mm with the 3.5-inch drive cage fitted. Seven expansion slots; supplied fan count and exact front-USB configuration should be checked by SKU.
Revision / variant identificationFARA R1 PRO is not the base FARA R1: PRO packaging and cooling bundles differ. Match SST-FAR1B-PRO or SST-FAR1W-PRO and revision.

Compatibility and fit notes

The 322 mm GPU figure assumes the relevant front-fan arrangement; measure the card and front radiator before purchase. A long PSU may conflict with the drive cage. Top radiator installation can impose memory-height restrictions (manufacturer specifies a low-profile-memory limit for some configurations).

  • Measure the exact GPU, CPU cooler, PSU, radiator and fan stack; nominal maximums may not be simultaneously usable.
  • Check motherboard standoff locations, front-panel connectors, PSU cable routing, drive cages and expansion-slot alignment before assembly.
  • Consult the applicable manual for screw locations, removable brackets, included hardware and fan/ARGB pinouts; do not force panels or boards into place.

Model-specific notes

FARA R1 PRO is not the base FARA R1: PRO packaging and cooling bundles differ. Match SST-FAR1B-PRO or SST-FAR1W-PRO and revision.

Sources & further reading

  1. SilverStone — FARA R1 PROManufacturer product page; server denied automated retrieval during this check.
  2. SilverStone — FARA R1 PRO specificationsManufacturer product family URL variant; verify region redirect and part number.

Specifications describe the identified model family; validate the exact part number, revision and regional package against the manufacturer's manual before purchase or installation.