[ TOWER AND LEGACY DESKTOP CASES // IDENTIFIED ENCLOSURE ]
NZXT H7 Elite (2023)
2023 ATX mid-tower. A model-specific enclosure record with physical fit limits, revision notes and manufacturer references.
IDENTIFICATION: Confirm the chassis label, model suffix, revision and regional bundle. Manufacturer maximum clearances are conditional on fan, radiator, drive-cage and cable configurations; allow room for connectors and service access.
Recorded specifications
| Cataloged model | NZXT H7 Elite (2023) |
|---|---|
| Era / class | 2023 ATX mid-tower |
| Dimensions and component limits | ATX, microATX, Mini-ITX and E-ATX boards up to 272 mm wide; 505 × 230 × 480 mm (H × W × D). Manufacturer limits: 400 mm GPU length and 185 mm CPU-cooler height. Front glass panel and included 3 × 140 mm RGB front fans on the 2023 Elite version. |
| Revision / variant identification | The year and Elite designation matter: the 2023 case differs from H7 Flow and earlier H7 Elite generations. |
Compatibility and fit notes
E-ATX width is limited to 272 mm. This Elite uses a glass front, unlike the perforated H7 Flow; do not assume equivalent front-radiator/airflow results. Verify whether your regional bundle includes the RGB controller and the specific fan count.
- Measure the exact GPU, CPU cooler, PSU, radiator and fan stack; nominal maximums may not be simultaneously usable.
- Check motherboard standoff locations, front-panel connectors, PSU cable routing, drive cages and expansion-slot alignment before assembly.
- Consult the applicable manual for screw locations, removable brackets, included hardware and fan/ARGB pinouts; do not force panels or boards into place.
Model-specific notes
The year and Elite designation matter: the 2023 case differs from H7 Flow and earlier H7 Elite generations.
Sources & further reading
- NZXT — H7 Elite product pageManufacturer product listing.
- NZXT Support — H7 Series (2022–2023) specificationsManufacturer support specifications for generation-specific fit limits.
Specifications describe the identified model family; validate the exact part number, revision and regional package against the manufacturer's manual before purchase or installation.