ALIENCULTIST.COM
HARDWARE ARCHIVES // CASE RECORD

[ MODEL IDENTIFICATION // LIAN LI O11 VISION ]

Lian Li O11 Vision

A columnless, three-sided glass ATX mid-tower measuring 480 × 304 × 464.5 mm, designed around side, bottom and rear radiator locations.

Original schematic of the Lian Li O11 Vision glass-sided chassis, not to scale
MODEL SCHEMATIC // NOT TO SCALE

FIT CAVEAT: This Vision layout has no conventional top radiator mount beneath its glass top. Use the O11 Vision manual's configuration drawing; do not substitute O11 Vision Compact dimensions or fit data.

Dimensions & fit specifications

External dimensions480 × 304 × 464.5 mm (D × W × H).
MotherboardsE-ATX under 280 mm wide, ATX, microATX and Mini-ITX; check cable pass-throughs on wide E-ATX boards.
GPU / CPU cooler / PSUGPU up to 430 mm long; CPU cooler up to 174 mm high; ATX PSU under 232 mm.
RadiatorsTwo positions support up to 360 mm plus one up to 240 mm; usable locations are side, bottom and rear. Manufacturer setup recommends side push-pull 360 mm, bottom intake and rear exhaust. Top is glass, not a radiator mount.
Drive cagesTwo removable cages; each accepts two 3.5-inch HDDs or two 2.5-inch SSDs. Removing cages opens cable-routing space.
Graphics mountingSeven horizontal slots and four-slot vertical GPU support; included riser is PCIe 5.0 ×16.

Compatibility & preservation

The GPU maximum is 430 mm; vertical orientation, power-connector bend and radiator/fan thickness can make a shorter card the practical limit. The recommended side push-pull assembly consumes additional side-chamber space. The glass design relies on the documented airflow arrangement and deliberate fan placement.

  • Keep the removable top/bottom supports, GPU riser, drive cages, glass hardware and rubber grommets with the chassis.
  • Route PSU and front-panel cables before filling both drive cages; the cages are removable for a reason.
  • Use the manual for the supported glass-panel and bottom-fan configurations; avoid carrying the assembled case by its glass.

Manufacturer sources

  1. Lian Li — O11 Vision product specificationsOfficial model dimensions, GPU/cooler clearance, board fit and radiator configuration.
  2. Lian Li — O11 Vision manual (PDF hosted by Google Drive)Manual linked in Lian Li's official product download section; installation and layout reference.