[ IDENTIFIED ENCLOSURE // VINTAGE DESKTOP AND PORTABLE SYSTEMS ]
IBM PS/2 Model 30 8086 system unit
IBM 8530 desktop; dimensions vary by 8530 submodel and are not stated consistently across hardware-manual revisions. Proprietary IBM planar and 16-bit expansion; no ATX fit. Confirm 8530-021/022/041 and Model 30-286 differences.
VARIANT / ARCHIVAL CAVEAT: Do not confuse 8086 Model 30 with 286-based 8530. Preserve planar supports, riser, power harness and drive bezel matched to machine type.
Mechanical specifications and fit
| Catalog identity / revision | IBM PS/2 Model 30 8086 system unit |
|---|---|
| Dimensions / construction | IBM 8530 desktop; dimensions vary by 8530 submodel and are not stated consistently across hardware-manual revisions. |
| Drive bays / storage | One 3.5-inch diskette bay and one fixed-disk position on applicable 8530 builds. |
| Board, system and compatibility | Proprietary IBM planar and 16-bit expansion; no ATX fit. Confirm 8530-021/022/041 and Model 30-286 differences. |
| Revision / service note | Do not confuse 8086 Model 30 with 286-based 8530. Preserve planar supports, riser, power harness and drive bezel matched to machine type. |
Preservation and installation notes
Match the case and all internal assemblies by model suffix and board/drive revision; do not substitute visually similar generations.
- Photograph the complete model label, assembly revision and option identifiers before opening; keep matching covers, brackets, shields, trays and fasteners together.
- Before energizing any restored unit, check the period service procedure, insulation and PSU condition. A CRT system can retain hazardous voltage; use a qualified technician for CRT service.
Manufacturer manuals and model-specific sources
- IBM PS/2 Model 30 8086 system unit manufacturer specifications / product referenceModel-specific manufacturer specification, owner/service manual or technical reference; verify exact model and revision.
- IBM PS/2 Model 30 8086 system unit manual and service documentationModel-specific manufacturer specification, owner/service manual or technical reference; verify exact model and revision.
Where normalized dimensions or option-specific limits are not published, the record states that limitation rather than asserting a generic fit. Verify the cited manual revision against the specimen.