ALIENCULTIST.COM
HARDWARE ARCHIVES // COMPONENT RECORD

[ TOWER AND LEGACY DESKTOP CASES // IDENTIFIED ENCLOSURE ]

Antec Performance 1 FT

2023 full-tower chassis. A model-specific enclosure record with physical fit limits, revision notes and manufacturer references.

Original local reference schematic for the Antec Performance 1 FT, not a product photograph or dimensional drawing
ORIGINAL LOCAL SCHEMATIC // NOT TO SCALE

IDENTIFICATION: Confirm the chassis label, model suffix, revision and regional bundle. Manufacturer maximum clearances are conditional on fan, radiator, drive-cage and cable configurations; allow room for connectors and service access.

Recorded specifications

Cataloged modelAntec Performance 1 FT
Era / class2023 full-tower chassis
Dimensions and component limitsE-ATX up to 285 mm wide, ATX, microATX and ITX boards; 522 × 230 × 522 mm (H × W × D). Maximum GPU length 400 mm and CPU-cooler height 175 mm. Supports up to a 420 mm front radiator; listed bundle has three 140 mm front fans and one 120 mm rear fan.
Revision / variant identificationPerformance 1 FT includes a front temperature display and dual tempered-glass side panels. Model is distinct from Performance 1 FT White only by finish/accessory SKU.

Compatibility and fit notes

With the HDD cage installed, PSU length allowance is shorter (about 245 mm); removing the cage changes drive capacity. E-ATX boards over 285 mm wide may not fit. Radiator/fan stack and drive cage positions should be checked against the exact build.

  • Measure the exact GPU, CPU cooler, PSU, radiator and fan stack; nominal maximums may not be simultaneously usable.
  • Check motherboard standoff locations, front-panel connectors, PSU cable routing, drive cages and expansion-slot alignment before assembly.
  • Consult the applicable manual for screw locations, removable brackets, included hardware and fan/ARGB pinouts; do not force panels or boards into place.

Model-specific notes

Performance 1 FT includes a front temperature display and dual tempered-glass side panels. Model is distinct from Performance 1 FT White only by finish/accessory SKU.

Sources & further reading

  1. Antec — Performance 1 FTManufacturer product specifications for the black Performance 1 FT.
  2. Antec — Performance 1 FT WhiteManufacturer documentation for the same chassis family; confirm black SKU-specific accessories.

Specifications describe the identified model family; validate the exact part number, revision and regional package against the manufacturer's manual before purchase or installation.