ALIENCULTIST.COM
HARDWARE ARCHIVES // PART RECORD

[ DISPLAY CABLES AND ADAPTERS // IDENTIFIED COMPONENT ]

DVI-D Dual-Link Display Cable

Digital video cable, dual-link DVI. This file identifies a specific part or clearly bounded model family, rather than an overview of the category.

Original locally stored schematic illustration for DVI-D Dual-Link Display Cable; not a product photograph
LOCAL REFERENCE SCHEMATIC // NOT TO SCALE

IDENTIFY THE REVISION: Check the complete product code, suffix, board revision, region, firmware, and date code. Similar names do not guarantee the same hardware.

Part specifications

Catalog subcategoryDisplay cables and adapters
Catalog identityDVI-D Dual-Link Display Cable
Generation / familyDigital video cable, dual-link DVI
Architecture / ratings24+1-pin dual-link DVI-D; supports higher pixel clock than single-link with compatible source/display.
Interface / fitDVI-D is digital-only; dual-link DVI-I and DVI-D connector/pin arrangements differ; adapter direction matters.
Variants / field identificationDual-link passive cable does not convert DisplayPort/HDMI protocol; active adapter may be required.
Evidence to collectPhotograph the nameplate and PCB labels; record test system, firmware, installed accessories, condition, and manual/datasheet revision used to verify specifications.

Compatibility, care & service

  • Check electrical signaling, pinout, voltage, current, connector, mounting and supported firmware before installation; do not rely on matching shapes alone.
  • Inspect physical condition and manufacturer warnings; mains PSUs, CRTs, batteries and spinning media may retain hazardous energy or require specialist service.
  • For vintage equipment, use the correct bus generation, BIOS, driver, media type, cable orientation and resource configuration documented for the machine.
  • Record measured results separately from the manufacturer's published limits and state the setup and measurement conditions.

Model-specific notes

DVI-D is digital-only; dual-link DVI-I and DVI-D connector/pin arrangements differ; adapter direction matters.

Dual-link passive cable does not convert DisplayPort/HDMI protocol; active adapter may be required.

Sources & further reading

  1. Manufacturer / standards reference — DVI-D Dual-Link Display CableSource for product-family specifications; compare exact suffix, revision, and region with the unit label.
  2. Manufacturer / standards reference — DVI-D Dual-Link Display CableSource for product-family specifications; compare exact suffix, revision, and region with the unit label.

Links lead to manufacturer or standards references where available. If a source covers a family, use the exact model's manual as the final authority.