[ INDIVIDUAL COMPONENT // OPTICAL FIBER PATCH CORD ]
Belden FP4LDLD002M OM4 LC Duplex Fiber Patch Cord
An OFNR-rated 2 m LC duplex OM4 patch cord for riser-rated multimode network patching.
IDENTIFICATION: Exact manufacturer model/SKU: Belden FP4LDLD002M. Connector fit alone does not establish electrical, optical, protocol or platform compatibility.
Product specifications
| Manufacturer model / SKU | Belden FP4LDLD002M |
|---|---|
| Product type | OPTICAL FIBER PATCH CORD |
| Connector/end types | LC duplex → LC duplex, two-fiber A-to-B polarity. |
| Fiber grade / Ethernet category | OM4 50/125 µm multimode, 2-fiber zipcord. |
| Length | 2 m; 2.0 mm × 4.0 mm zipcord jacket profile. |
| Bend radius and shielding | OFNR riser-rated Erika-violet jacket; dielectric fiber with no metallic EMI shield. Belden specifies minimum bend as 15× cable OD during installation and 10× OD in operation; the zipcord profile is 2.0 mm × 4.0 mm, so follow the manufacturer installation drawing rather than assuming a circular jacket diameter. |
| Speed / distance limits | For compatible 10GBASE-SR optics, OM4 supports up to 400 m at 850 nm on a compliant channel; transceiver and channel budgets govern actual reach. The OM4 maximum is for the complete channel, not the 2 m cord alone. |
| Compatibility | LC duplex OM4 multimode network ports and panels, correct A-to-B polarity, 850 nm short-reach optics; do not mate single-mode or APC connectors. |
Compatibility and handling
LC duplex OM4 multimode network ports and panels, correct A-to-B polarity, 850 nm short-reach optics; do not mate single-mode or APC connectors.
Bend-radius note: 15× cable OD during installation and 10× cable OD in operation, per Belden; use the specified 2.0 mm × 4.0 mm zipcord profile and do not kink.
Shielding / jacket: Dielectric optical cable, OFNR jacket; no conductive EMI shielding.
Inspect the jacket, strain relief, latch and end faces before use. For optical assemblies, keep dust caps in place and never look into a live fiber. For copper/active-end assemblies, avoid tight bends and cable crushing; validate PoE and device compatibility from the relevant port documentation.
Manufacturer sources and technical references
- Belden — FP4LDLD002M product recordExact model, OM4 grade, connector ends, length and jacket construction.
- Belden — FP4LDLD002M manufacturer catalog recordManufacturer catalog specification and bend-radius data.
- Corning — multimode fiber connectivity guidanceFiber manufacturer reference for OM4 link distances.
Manufacturer sources are HTTPS. Limits quoted here are link/application limits: the installed cable channel, transceivers, connectors, port support and installation quality determine actual service. Confirm model revision and regional documentation before deployment.